HUEPAR Laser Distance Meter with Camera Zoom 656Ft High Accuracy Rechargeable

Description

Huepar LM200C Laser Measure Specifications:
Measuring Range: 0.05~200m / 0.16~656ft
Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW
Laser Wavelength: 630-670nm
Measuring Accuracy (Typical): ± 2.0mm / ± 1/13 inch
Tilt-Sensor Accuracy (Typical): ± 0.3°
Memory: 1000 Sets
Angle range: ± 90°
Measuring Reference: Top/Tripod/Rear
Measuring Units: m/ft/in/ft+in Auto Power Switch-off: After 180s
Power Source: 3 x AAA NI-MH rechargeable batteries
Tripod Mount Size: 1/4"-20
IP Rating: IP65
Operating Temperature: 0℃~+40℃(+32°F~+104°F)
Dimension: 115 x 49 x 26mm
Weight with battery: 140g
Screen Display: 2.0-inch Rotating Color Display
Package Contents:
1 x Huepar Laser Measure LM200C
3 x AAA NI-MH rechargeable batteries
1 x USB cable
1 x Reflector
1 x Hand Strap
1 x Pouch
1 x User Manual
Camera with Adjustable 2X /4X Zoom
This laser measure uses a point finder camera with 2X/4X adjustable zoom, allowing you to target the destination point precisely with the crosshair in the display, even when working in areas with restricted visibility or outdoor situations.
Angle, Leveling & Rotating Display
The built-in inclinometer determines the angle of pitch and the digital bubble level to confirm when the tool is level, which is excellent for leveling applications as well as inclination measurement.
The rotatable display can be switched on/off freely, which allows you to read the screen from any angle for a better user experience.
Basic Practical Functions
The memory function is perfect for recalling the last 1000 measurements, ensuring your most data is available at any time.
There are four units to choose from: meter, feet, inch, feet+inch.
The laser meter allows for adding and subtracting distance/area/volume, so you can work out unusual shapes.
Versatile Measurements
When setting out and marking positions for stud framing or other stake-outs, Stake Out feature helps you save time and boost accuracy.
The Trapezium Function is useful for determining the length and slope of a roof section, and the area it covers.
The meter uses the internal tilt sensor to calculate the angle and the distance between the shots, which means you can measure roofs more accurate from the ground.
Besides measuring the volume of the cube, the meter also has the function of measuring the volume of the cylinder.
Indirect Distance Measurement
3D Measuring (Point to Point)-measuring the distance to point 1 and then to point 2 and the distance between the two points will be displayed on the meter. This is a revolutionary feature, which is effective and optimises your workflow.
With the Pythagoras and indirect length/height function, you can easily execute indirect measurements of height & length such as measuring the height of a multi-storey building with no direct sight or obstacle in the way or even the measurements between 2 to 3 points.
3 Measurement Reference Points
Depending on the use, three measurement reference points can be selected: front end, rear end, and 1/4 inch screw hole.
Since there is a 1/4 inch camera standard screw hole, it can be measured more accurately by attaching it to a tripod if there is a risk of errors due to device shake.
It can be very useful when measuring in Indirect measurement mode.
User-friendly Design
Easy-to-read backlit color display illuminates numbers in dark areas with distinct resolution, allowing work in low-light or no-light conditions.
All 6 surfaces of the meter can be placed flat on the surface to reduce errors and make the measurement more accurate.
You can use the reflective plate equipped to enhance the laser reflection to make measurement easier and more convenient while the data is more accurate.