-40%
Huepar Laser Level Green Beam 4X360 4D with Pulse Mode Triple Power Supply
$ 104.93
- Description
- Size Guide
Description
STORE CATEGORIESSTORE CATEGORIES
Auction
US STOCK
Ship to the world
Other
Product Description:
S04CG-L 4 x 360° Green Beam Floor Laser Level Specifications:
● Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
● Number of Lines: Two 360° horizontal floor laser lines & Two 360° Vertical laser lines
● Laser Wavelength: 505-520nm
● Horizontal/Vertical Accuracy: ±1/9 inch at 33Ft.
● Leveling/Compensation Range: ±3.5°
● Working Distance (Line): 130Ft (100 LUX), 200Ft. with Huepar Receiver LR-5RG/LR-6RG
● Power Source: Li-ion battery & 4×AA (LR6) batteries
● Operating Time: with Lithium Battery: 5 hours with all laser beams on; with AA Batteries: 0.5 hours with all laser beams on
● IP Rating: IP54 dust-proof, waterproof and shockproof, reliable and tough
● Mount Size: 1/4"-20
Package Contents:
1 x 4D Green Tiling Laser Level S04CG-L
1 x Rechargeable Li-ion Battery
1 x Power Adapter& Type-C cord
4 x AA (LR6) Batteries & 1 x AA Battery Holder
1 x Magnetic Bracket
1 x Lifting Base
1 x Steel Sheet
1 x Laser Target Plate
1 x Lase Level User Manual
1 x Portable Bag
4 X 360°Laser Lines & Line Switching :
● This laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation.
● Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout.
● Short press the "H" and "V" buttons on the keypad to switch the Horizontal and Vertical laser lines separately.
● The four laser lines can be selected individually depends on job site applications.
● Huepar S04CG-L laser level is a complete tool to cover the floor, wall, ceiling all around the room.
Self-leveling mode&Manual mode
Self-leveling mode:
Once the pendulum unlocked, the self-leveling mode is enabled. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±3.5°.
Manual mode:
When the pendulum is in the locked position, the laser tool can be placed for use at any angle.
The laser beam will blink every 3-5 seconds to remind you it's not self-leveling now.
In manual mode, when all laser lines are switched off, the laser tool will shut OFF automatically after about 5 minutes of inactivity.
360° Horizontal Tiling Laser & Lifting Base
● Huepar S04CG-L floor laser tool generates one 360°horizontal tiling laser on the floor or wall providing all-around leveling coverage for the layout of tile, stone, brick, carpet and hardwood flooring.
● With the lifting base, the laser lines raise from the surface to project over and travel past uneven surfaces or obstructions between 1" and 3.54" height.
Durable Design & Multiple Applications
● The laser tool is covered by TPR soft rubber, which delivers soft touch and stronger protection.
● IP54 water/dust resistance ensures you work well in hazardous working conditions.
● This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.
● The 16 lines laser level is a great tool for both indoor and outdoor job sites.
Suitable for Multiple Scenes
Huepar S04CG-L 4D Green Laser Level provides an all-in-one level and alignment solution for one-person job setup.
This 360° cross line laser tool is ideal for paving floor tiles, installing ceilings, door, window, or furniture carpentry, hanging wallpaper, etc.
The self-leveling laser tool enables complete coverage of the entire room.
Pulse Mode
● After power on, short press the power button to switch ON/OFF the pulse mode.
● Pulse mode extends the working range up to 200Ft in brighter working conditions when using with Huepar Line Laser Receiver.
● It is compatible with Huepar LR-6RG / LR-5RG Laser Detector only.
Note: Keep the pulse mode on when using with a receiver.
Triple Power Methods
● This laser tool utilizes the included large capacity Li-ion battery which is compatible with Samsung SB-L110 battery.
● Huepar 360 laser level also comes with a holder for installing 4 AA batteries to use the tool.
● The 16 lines laser level can be used at the work site by plugged in directly when taking out the battery.
● With Type-C charging port, the laser level can also be charged by laptop, power bank, car charger, etc.
More Installation Methods
● 1/4"-20 female thread on the laser level can help to mount it to the tripod or laser mounting pole.
● 360° Strong Magnetic Pivoting Base: Allows being adsorbed onto metal track and steel. The base provides 360° free rotation to meet different angles required.
● Green Laser Target Plate: Increases the visibility of the laser beam.
Copyright © Huepar. All rights reserved.