Red Green Laser Receiver Outdoor Mode Laser Detector Pulsing Detect Digital LCD

Description

【HUEPAR DEDICATED RECEIVER】- Huepar LR-6RG receiver can
ONLY
use with Huepar Line Laser Level. Recommended for use in accompanied with Huepar901CG/902CG/8211G/BOX-1G/BOX-1R/GF360G/GF360R/622CG/622CR/621CG/621CR/602CG/602CR/603CG/603CR Laser Level.
【AVAILABLE FOR RED AND GREEN PULSE LASER】- Turn on the Pulse Mode of the laser level, then Huepar LR-6RG laser receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 60m.
【CLEAR MULTI-SIDED READOUTS】- Ergonomic design with display on the front, side and back of receiver, offers easier visual readout. This unit is outfitted with a dual-sided Bubble Vial on both the front and top, in order to more accurately determine the level.
【PRECISE OPTICAL AND ACOUSTIC SIGNALS】- This laser receiver features a user-friendly interface and is smart in its simple design. Optical and acoustic signals help to locate the laser plane quickly and accurately. The LED indicator provides a clear and accurate signal. Beep sounds will remind you when you find the target.
【LONG BATTERY LIFE AND CLAMP HOLDER】- The receiver comes with a 9V dry battery, providing you with about 70 working hours. There is also an automatic shut-off feature that power down the device after about 8 minutes of being idle to extend battery life. The attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point.
Huepar LR-6RG Laser Detector Specifications:
PWM
1:1
Frequency
10KHz (Matched PWM and frequency,
Line lasers can work with LR-6RG Laser Receiver)
Display
Three-sided LED indicator display
Leveling Accuracy
±1.5mm(±1/17 In.)
Laser Reception Window Width:
20mm(4/5 In.)
Laser Reception Window Height
20mm(4/5 In.)
Working Distance
60m(200ft)
Operating Time
70 hours
Auto Power Off (with No Signal Detected)
8 min
Power Source
1*9V Dry Battery
Operating Temperature Range
-10
℃
to + 50
℃
Storage Temperature Range
-25
℃
to + 70
℃
Dimension (LxWxH)
140.5mm×60mm×35mm(5.5 x 2.5 x 1.5 inches)
Weight
143g
Items in the Package:
1*Huepar LR-6RG Laser Detector
1*Heavy-duty clamp
1*9V Dry Battery
Using Tips
Put the laser level in Pulse (Outdoor) Mode.
Made sure the laser level and the Receiver windows were clean.
Recheck the batteries in both devices (Laser level & Huepar Laser Receiver).
Made sure your laser level could used in accompanied with Huepar Receiver.
Recommended for using with Huepar laser level
Precise Optical Signals
Move the Detector as the Direction Shown:
Datum Lower than Laser Beam – Move Up
Datum Higher than Laser Beam – Move Down
When Datum in Line with Laser Beam – The LED Indicator Light is Displayed in Green
Buzzer Remind
A beeping tone signals that the laser beam has been detected:
A slower beeping tone signals – Move Up
A fast beeping tone signals – Move Down
Clear multi-sided readouts
Three-Sided LED Displays, provide clear LED signal prompts on three sides
LED displays on the front
LED displays on the side
LED displays on the back
Built-in Bubble and Holder
LR-6RG Laser Detector comes complete with a compatible rod mounting bracket. The built-in bubble level provides an extra measure of leveling accuracy.